Optika Italy B-1000 Serie Manuel D'utilisation page 15

8.1.4 Motorized version
1. Assemble the stage in the same way as the manual version.
Check the perfect alignment of the rear part of the stage with
the rear arm of the frame. An imperfect alignment could lead
to an incorrect functioning of the system. (Fig. 15)
2. Connect the cable ① from the stage to the frame and tight
the locking screws of the connectors ②. (Fig. 16)
3. Connect the provided cables: ③ 12V power supply for the
motorized parts; ④ 6V microscope power supply; ⑤ serial
cable; ⑥ PS/2 mouse. (Fig. 17)
• Connect power cables as the last step.
Page 15
②
①
③ ④ ⑤ ⑥
F ig. 15 F ig. 15
F ig. 16 F ig. 16
F ig. 17 F ig. 17