Optika Italy B-1000 Serie Manuel D'utilisation page 11

8. Assembling
8.1 Assembling the microscope
8.1.1 Manual version
1. Put the microscope stand on a solid table. Insert fluores-
cence attachment above the stand, using the Allen wrench to
tighten the screw. (Fig. 1)
2. Insert the optical head above the attachment, using the Allen
wrench to tighten the screw. (Fig. 2)
3. Insert eyepieces into the empty eyepiece sleeves. (Fig. 3)
4. Insert the condenser under the stage: position until it is well
inserted into its holder (under the condenser there is a pin
that must fully enter the holder guide). (Fig. 4)
5. Lock the condenser fixing knob ①.
Page 11
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F F ig. 3 ig. 3
①
F ig. 4 F ig. 4