Publicité
Les langues disponibles
Les langues disponibles
18
Downloaded from:
https://www.usersmanualguide.com/
START/STOP
VISS
RM-V700U (optional)
RETAKE
RECORDING
Basic Features (cont.)
FEATURE:
Index Code Marking
PURPOSE:
To give you automatic access to any
selected point on a recording. Auto
Marking and Manual Marking are
available.
OPERATION:
Auto Marking
An index code is marked to start the
first recording after a cassette is
inserted, as long as the Power switch
is set to "CAMERA".
Manual Marking
1) Press VISS once to place the index
code. INDEX blinks in the
viewfinder during marking.
NOTE:
● If VISS is pressed during
Record–Standby mode, the mark is
placed where RECORDING
START/STOP is pressed.
FEATURE:
Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the
Record–Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording.
3) Press RECORDING START/STOP
to start recording.
NOTE:
● Noise may appear during Retake.
This is normal.
Publicité
