Publicité
Les langues disponibles
Les langues disponibles
RECORDING
Downloaded from:
https://www.usersmanualguide.com/
Basic Features
Zoom-in
W
W
W
T
T
T
Zoom-out
Zoom indicator bar
W
Zoom level
indicator
T
Power zoom lever
FEATURE:
Zooming
PURPOSE:
To produce the zoom in/out effect, or
an instantaneous change in image
W
magnification.
OPERATION:
28X Hyper zoom
T
Digital circuitry doubles the
maximum 14x magnification offered
by optical zoom.
1) To zoom in, slide the Zoom Lever
toward "T".
2) To zoom out, slide toward "W".
● During Hyper Zoom, the speed
NOTES:
increases the further you slide the
Zoom Lever.
● Focusing may be come unstable
during Hyper Zoom. In this case,
set the zoom while in Record –
Standby, set manual focus or Focus
Lock (
or out in Record mode.
● The Zoom Level Indicator ( 5 ) only
moves during optical zoom. Once
the indicator reaches "T", all
magnification from that point is
through digital processing.
● During digital image processing,
the quality of the image may suffer.
FEATURE:
Quick Review
PURPOSE:
To check the end of the last
recording.
OPERATION:
1) Press "
during the Record–Standby mode.
• Tape is rewound for about 2
seconds and played back
automati-cally, then pauses in
Record–Standby mode for the
next shot.
NOTE:
Distortion may occur at start of
playback.
This is normal.
17
pg. 24, 25), then zoom in
" and release quickly
Publicité
