2.2 Basic safety instructions
Handling the instrument
►
Please take note of the information in these instruc-
tions for use.
►
Keep the instructions for use in a safe place. The
instructions for use are a component of the device
and must be available at all times.
DANGER!
Risk of explosion
Do not use the device in an environment in
which one of the following gases has accumu-
lated:
– oxygen
– flammable anesthetics
– other flammable substances/air mixtures
CAUTION!
Patient hazard, damage to device
►
Additional devices which are connected to
electrical medical devices must provide
evidence of compliance with the relevant IEC
or ISO standards (e.g. IEC 60950 for data-
processing devices). Furthermore, all
configurations must comply with the
requirements of standards for medical
systems (see IEC 60601-1-1 or Section 16 of
the 3rd edition of IEC 60601-1 respectively).
Anyone connecting additional devices to
electrical medical devices is considered a
system configurer and is therefore
responsible for ensuring that the system
complies with the requirements of standards
for systems. This also applies to additional
devices recommended by
attention is drawn to the fact that local laws
take precedence over the above-mentioned
requirements of standards. In the event of
any queries, please contact your local
specialist dealer or Technical Service.
►
Have servicing carried out regularly as
described in the relevant section of this
document.
►
Technical modifications may not be made to
the device. The device does not contain any
parts for servicing by the user. Only have
servicing and repairs performed by an
authorized seca Service partner. You can find
English
seca.
Your
Safety information • 65