Install The Blower In The Cabinet - Broan Elite E662 Guide D'installation

8. INSTALL THE BLOWER IN THE CABINET

8.1 Install the cabinet blower in the cabinet and rest it on the adaptor plate. If a framed cabinet is used, insert the blower
as shown in pictures below.
S 1
TEP
HH0052
8.2 V
ERTICAL DISCHARGE ONLY
8.2.1 Using four (4) #8 x ⁄
1
2
to the top of the cabinet blower. Remove tape from damper flap. Seal
the adapter to the cabinet blower using duct tape.
8.3 A
LL DISCHARGE TYPES
8.3.1 From inside the hood, secure the blower to the adaptor plate of the
hood using five (5) #8 x
8.3.2 Plug the cabinet blower to the hood receptacle.
S 3
TEP
HH0054
'' screws provided with hood, secure the adapter
3 ⁄ '' screws.
8
S 2
TEP
HH0053
HO0043
HO0044
- 6 -
1 2
S
CREW LOCATIONS
4
3 5
HE0053