Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9. CONNECT WIRING
Risk of electrical shock. Electrical wiring must be done by qualified personnel in accordance with
all applicable codes and standards. Before connecting wires, switch power off at service panel and
lock service disconnecting means to prevent power from being switched on accidentally.
Connect cable using provided wire connectors.
Connect wires as follow: WHITE to WHITE (A), BLACK to BLACK (B), and
GREEN or BARE wire under GREEN ground screw (C).
DO NOT FORGET TO CONNECT THE GROUND.
10. REINSTALL SIDE PANELS
Reinstall both side panels, using 3 screws per side (saved from step 5), as
shown beside.
Remove protective plastic film covering filters before
installing them.
Reinstall filters.
WARNING
!
CAUTION
HE0054
HO0042
- 7 -
A
B
C
S
L
CREW
OCATIONS
Publicité
Table des Matières
