Install The Hood - Broan Elite E54000 Mode D'emploi

INSTALL THE UPPER
DECORATIVE FLUE, cont'd.
NON-DUCTED HOODS ONLY
(8-FOOT AND 9-FOOT CEILINGS)
4. Install the upper flue with air vent "up".
Secure to the support frame with (2)
2.9x9.5mm mounting screws. Fig. 16.
(10-FOOT CEILINGS)
5. Discard the upper flue supplied with the
hood. Replace with the upper flue
supplied with flue extension model
FXN54SS.
6. Install with air vents "up" and secure to the
support frame with (2) 2.9x9.5mm
mounting screws.
INSTALL LOWER
DECORATIVE FLUE
1. Slide the lower flue up and over the upper
flue until it contacts the ceiling.
Temporarily secure the both halves
together with duct tape. Fig. 17.

INSTALL THE HOOD

!
CAUTION: At least two installers are
required due to the weight and size of the
hood.
1. Secure the hood to the support frame with
(6) 3.9x9.5mm mounting screws and (2)
serrated washers. Fig. 18.
MOUNTING SCREWS
UPPER
FLUE
LOWER
FLUE
TAPE
SERRATED
WASHERS
MOUNTING SCREWS
(3.9x9.5mm)
- 12 -
(2.9x9.5mm)
VENTS
"UP"
FIG.16
FIG.17
FIG.18