Light Bulbs - Broan Elite E662 Guide D'installation

11. LIGHT BULBS

This hood must use 120V, 50W max., type MR16, GU10 shielded halogen lamps. (Purchase separately.)
In order to prevent the risk of personal injury, do not install a lamp identified for use only in
enclosed fixtures.
NOTE: The rings must be removed from bottom panel before installing halogen lamps.
11.1 Install the lamps by placing the bulb leads into their grooves in the socket
and gently push upward and turn clockwise until secured.
11.2 Install trim rings by pushing upward.
In order to prevent the risk of personal injury, the halogen lamps
must be cooled down before removing them.
11.3 To remove lamps, gently push upward and turn counterclockwise to
disengage bulb leads from their grooves.
WARNING
!
! WARNING
- 8 -
HE0047
HO0034
HE0047