Installation; Packaging And Unpacking - Sagi FERMA LIEVITA Manuel D'installation, D'utilisation Et D'entretien

ENGLISH
Open Door Signal
The display shows the
following message:
Door Open
The buzzer is active.
RTC Alarm
The display shows the
following message:
ALL RTC
GB
The buzzer is active.
EEPROM Alarm
The display shows the
following message:
ALL EEPROM
The buzzer is active.
8.

INSTALLATION

8.1.

Packaging And Unpacking

Move and install the appliance respecting the
information provided by the manufacturer, shown
directly on the packaging, on the appliance and in
this manual.
The lifting and transportation system of the
packaged product envisages the use of a fork-lift
truck or a pallet stacker, using which particular
attention must be paid to balancing the weight in
order to prevent the risk of overturning (avoid
excessive tilting!).
!
ATTENTION: When inserting the lifting
device, pay attention to the gas supply pipe and
the position of the feet.
!
ATTENTION: given the presence of weights
concentrated in the high part of the appliance, do
not drag the appliance during movements (tipping
hazard and damage to feet).
The packaging is made of cardboard and the
pallet of wood. A series of symbols is printed on
the cardboard packaging which highlights, in
accordance with international standards, the
provisions which the appliances must be subject
The buzzer can be
silenced pressing any
key.
All cycles in course are
blocked and all outlets
deactivated.
The buzzer can be
silenced pressing any
key.
All cycles in course are
blocked and all outlets
deactivated.
The buzzer can be
silenced pressing any
key.
22
Door Opening.
Malfunctioning of the
internal clock.
Time has not been set
Internal circuit board
malfunctioning.
to during loading, unloading, transportation and
storage.
TOP FRAGILE
HANDLE WITH
CARE
On delivery, check that the packaging is intact and
has not suffered
transportation.
Any damage must be notified to the transportation
company immediately.
The appliance must be unpacked as soon as
possible to check that it is intact and undamaged.
Do not cut the cardboard with sharp tools in order
to prevent damage
underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
The signal automatically
returns once the door is
closed.
Set the current date and
time.
(see specific chapter)
Replace the circuit board.

Contact the after-
sales centre.
DO NOT
EXPOSE TO
HUMIDITY
any damage during
to the steel panels