Sagi FERMA LIEVITA Manuel D'installation, D'utilisation Et D'entretien page 45

Menu 03: Pre cooling Cycle
It is possible to carry out a pre cooling cycle
before carrying out a manual or automatic cycle.
With the machine in STAND-BY press key
and select the menu COOL with keys
Menu 03
Cooling
.
To select the cycle press key
SetPoint mode
SetTemperature
-12°C
Pressing , the change mode is entered and
the value flashes. With keys
possible to change the values.
Menu 04: Defrost Cycle
It is possible to Defrost when the board is in
STAND-BY.
With the machine in STAND-BY press key
and select the menu DEFROST with keys
Menu 04
Defrost
:
Menu 05: Setting the Time
With the machine in STAND-BY press key
and select the menu SET TIME with keys
Menu 05
Clock Settings
:
to change the time.
Menu 06: SUMMER time Setting
With the machine in STAND-BY press key
and select the menu SUMMER TIME with keys
Menu 06
Summer time
:
to change the time.
:
. The change
is displayed:
it is
. Press key
. Press key
15
Press key to confirm the value set and the
data no longer flashes. Press key
the cycle.
Cooling 06:18
T=-14°C
On display:
indicates that the cooling cycle is underway and
the current time is 06:18. The second line
indicates the cell temperature of -14°.
Press key to return to the change SetPoint
mode. The changed SetPoint is memorised.
When the temperature set is reached, an
intermittent buzzer is activated.
Press key ,
Start ?
No OK
By pressing the key, exit the menu and
defrosting is not carried out; By pressing the
key defrosting is engaged.
SUN 17:52
can be modified using the keys
key to confirm the value and move on to the
next data. Press key
Menu.
Press keys . to change the time :
SUN 17:52
+1
. Press key
confirm the time change. Press the
go back to the Main Menu.
ENGLISH
to start
. The first line
to request defrost :
The flashing character
. Press
to return to the Main
to
key to
GB