Functionality - Sagi FERMA LIEVITA Manuel D'installation, D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
ENGLISH

5.3. Functionality

Switch on/off of the Controller
03/02/2006
Tue 17:35
pressing the ON/OFF key
the current date / time.
OFF
GB
pressing the
displays the OFF screen: In these conditions, all
controller outputs are forced off and the controller
itself enters a low consumption function mode
(equal to about 0.3W).
Menu 01 : Manual Cycle
The manual cycle consists of three phases:
 REFRIGERATION
 HEATING
 AIR CONDITIONING
Refrigeration
Menu
Manual
1.
STAND-BY, press key
menu 01 MANUAL.
Refrigeration
T=20°C
2.
pressed, the manual cycle setting mode is
entered. With keys
pass from one phase to another and the cycle
phase is displayed on the display: select the
REFRIGERATION phase.
Heating
Menu
Manual
1.
STAND-BY, press key
01 MANUAL.
Heating
T=20°C
2.
pressed, the manual cycle setting mode is
entered. With keys
pass from one phase to another and the cycle
phase is displayed on the display: select the
HEATING phase.
On switch-on, by
, the display shows
On
switch-off,
key for 5 seconds, the controller
01
With the machine in
and select the
If the
key is
it is possible to
01
With the machine in
and select menu
UR=65%
If the
key is
it is possible to
The electric board has 8 menus:
Menu 1 : Manual cycles (Cooling, heating
and Air conditioning)
Menu 2 : Automatic cycles (there are 7
cycles available to be personalised)
Menu 3 : Cooling Cycle
Menu 4 : Defrost Cycle
Menu 5 : Time setting Cycle
by
Menu 6 : Summer time Setting
Menu 7 : Language selection
Menu 8 : Setting Menu (Parameters,
Inlets and Outlets etc..)
Each phase is independent and the automatic
passage from one phase to another is not
provided.
Manual.
T=15
3.
the temperature flashes; with keys
it is possible to change the value.
4. When changed, press the
the value.
To change further the temperature values, repeat
the procedure or to start the cooling phase, press
key
.
Manual.
T=15°C
3.
the temperature flashes; with keys
it is possible to change the value.
4. When changed, press the
the value: the humidity value flashes. With
keys
value.
5. Press key
value.
10
13:39
Pressing key
key to confirm
13:39
UR=65%
Pressing key
key to confirm
it is possible to change the
to confirm the new humidity

Publicité

Table des Matières
loading

Table des Matières