Vapormed Mighty Medic Mode D'emploi page 89

10. T H E M I G H T Y M E D I C VA P O R I Z E R
Before maintenance, the device has
to be switched off and disconnected
from the power adapter. To do so, pull
the plug of the power adapter from the
MIGHT Y MEDIC Vaporizer.
The power adapter must be pulled out
the from the socket.
10.1. Cleaning of the MIGHTY
MEDIC Vaporizer and the
Power Adapter
For home use it is sufficient to clean
the housing of the MIGHT Y MEDIC
Vaporizer and the power adapter with
a damp cloth. Do not hold the device
under running water.
In a physician's office or clinic, the
housing of the MIGHT Y MEDIC Va-
porizer and power adapter can be
cleaned and disinfected with a surface
disinfectant.
The surface disinfectant should be
certified (e.g. VAH/DGHM or FDA ap-
proval or CE marking), be suitable
for disinfecting the MIGHT Y MEDIC
Vaporizer and power adpater, and
compatible with the Vaporizer and the
power adapter (see Chapter "Material
Resistance of the MIGHT Y MEDIC Va-
porizer", page 82).
Use only a soft clean cloth for wiping.
The cloth may be damp, but not wet.
Prevent liquid from entering the
MIGHT Y MEDIC Vaporizer and the
power adapter, as this can lead to dam-
ages on the electric parts and eventu-
ally to malfunctions.
If any liquid does get into the Vaporizer
or the power adapter, contact our Ser-
vice Center immediately.
10.2. Care and Maintenance,
Storage, Disposal
Before any maintenance work is done,
the MIGHT Y MEDIC Vaporizer has to
be switched off and the power adapter
unplugged from the power supply.
10.2.1. Storage
Store the MIGHT Y MEDIC Vaporizer
in a dry place protected against the ef-
fects of weather and out of the reach of
children or unqualified persons.
10.2.2. In Case of Problems
If the power adapter has been in
use, unplug it at the socket. Put the
MIGHT Y MEDIC Vaporizer in the origi-
nal packaging, or pack it properly in
other packing material, and send it to
our Service Center.
10.2.3. Disposal
If the MIGHT Y MEDIC Vaporizer or
the power adapter has been irrepara-
bly damaged after the warranty period,
please do not simply throw them away.
As they are made of high quality, com-
pletely recyclable component parts,
they should be brought to a mate-
rial recycling center in your neighbour-
hood or sent to our Service Center for
disposal.
89