Vapormed Mighty Medic Mode D'emploi page 80

7. T H E U S E O F H E M P F L O W E R S (C A N N A B I S F L O S)
7.2. Application and Inhalation
It is recommended to begin inhalation
at a temperature of 180°C (356°F).
Once the MIGHT Y MEDIC Vapor-
izer has reached the set temperature
(180°C (356°F)) (set and actual tem-
peratures are the same, also signaled
by a short double vibration) and the
Mouthpiece with Lip Piece is folded
out, the inhaling process can begin.
Using the MIGHTY MEDIC Vaporizer
If the vapor decreases when exhaling
after some draws, activate the booster
temperature by double-clicking the
orange-colored ON/OFF switch. If the
vapor decreases again, set the tem-
perature to 210°C (410°F). As soon as
there is no vapor recognizable when
exhaling at 210°C (410°F), the Dosing
Capsule is depleted and the inhalation
process has ended.
7.2.1. Breathing Technique
Take the Mouthpiece with Lip Piece be-
tween the lips, and inhale slowly and
evenly for several seconds.
Inhale only half of air you can normally
manage. Hold your breath for a few
seconds and exhale slowly. We rec-
ommend consciously concentrating
on your inhalation. The cannabinoid
aerosol is absorbed by the alveoli and
into the bloodstream. The onset of the
effect takes approx. 1-2 min.
7.2.2. End of Inhalation
After inhalation, turn off the MIGHT Y
MEDIC Vaporizer. To do this, press
the orange ON/OFF switch for at least
half a second. The Vaporizer acknowl-
edges the switching off with a short
vibration.
Remove the Lip Piece and dispose of it
in the residual waste.
Turn the Cooling Unit with a 90° ro-
tation counterclockwise in order to
remove it from the MIGHT Y MEDIC
Vaporizer remove the Dosing Capsule
from the Filling Chamber, open it and
dispose of the used hemp flowers in
the compost or residual waste.
80