Vapormed Mighty Medic Mode D'emploi page 74

5. C O M M I S S I O N I N G A N D O P E R AT I O N O F T H E
5.6. Temperature Setting
Set temperature display
(displayed blinking:
booster temperature)
Minus temperature button
The temperature can be set between
40°C and 210°C (104°F and 410°F)
(see Chapter 7. „The Use of Hemp
Flowers (Cannabis Flos)", page 78).
When you press the plus button, the
set value is increased, and when you
press the minus button, the set value is
decreased. When you briefly tap on the
plus or minus button, the set values are
increased or decreased respectively in
1-degree increments. If you keep the
plus or minus button pressed, the set
values start running continuously in
the corresponding direction.
The booster temperature can be ad-
justed in the same way. However, it
cannot be set lower than the previous
set temperature.
The current actual temperature can be
read from the upper line of the display.
M I G H T Y M E D I C VA P O R I Z E R
Actual temperature display
Plus temperature button
Fahrenheit/Celsius
If you simultaneously tap on the plus
button and the minus button, the dis-
play changes from degree Celsius to
degree Fahrenheit and vice versa.
5.7. Reset to Default Settings
It is possible to reset settings. The
reset is made by pressing the ON/
OFF button for ten seconds while the
MIGHT Y MEDIC Vaporizer is switched
on. If the ON/OFF button has been
pressed for ten seconds, the signaling
of the reset is made by vibration. The
basic temperature is reset to 180°C
(356°F) and the booster temperature
is reset to 195°C (383°F).
5.8. Default Settings
Basic temperature:
Booster temperature:
so corresponding to
74
Battery charging display
180°C (356°F)
additional 15°C (27°F),
195°C (383°F)