Vapormed Mighty Medic Mode D'emploi page 82

8.2. Material Resistance of the
MIGHTY MEDIC Vaporizer
Please ensure that the Lip Piece, the
Cooling Unit with Mouthpiece and
the MIGHT Y MEDIC Vaporizer do not
come in contact with the following
chemicals:
organic, mineral and oxidating
acids (min. permissible pH 5.5)
strong bases (max. permissible pH
10). We recommend using neutral/
enzymatic or slightly alkaline clean-
ers.
organic solvents (e.g. aldehyde,
ether, ketone, benzene)
oxidation agents (e.g. hydrogen
peroxide)
halogens (chlorine, iodine, bro-
mine)
aromatic/halogenated hydrocar-
bons
phenol derivatives, amin com-
pounds (in high concentrations)
oils and greases
Clean the parts of the MIGHT Y MEDIC
Vaporizer only with soft brushes, never
with metal brushes or steel wool.
8. H Y G I E N E
8.3. Disposable Lip Piece for Hy-
gienic Use
The Lip Piece will be delivered brand
new and in a low-germ, but not fully-
sterile state.
Its purpose is to avoid a health risk –
e.g. infection from a contaminated
Mouthpiece, or a contaminated Cool-
ing Unit.
potential contamination inside the
Cooling Unit by preventing breathing
into the Cooling Unit.
This ensures that the Cooling Unit can
be re-used several times before it has
to be cleaned (see Chapter 8.5. "Clean-
ing of the Cooling Unit with Mouth-
piece", page 85).
Cooling Unit with Mouthpiece and Lip Piece
82
The Lip Piece of the MIGHT Y
MEDIC Vaporizer is equipped
with a check valve. This check
valve reduces the danger of a