VATECH PaX-i PCH-2500 Mode D'emploi page 10

2. Getting started
2. Getting started
2.1
2.2
08
Turning on the PaX-i
Do not position the patient in the unit while it is initiating.
The patient could be injured if the equipment malfunctions.
WARNING
- Condensation could form inside the equipment if it is
a different temperature than the surrounding room.
Only turn on the equipment once it has reached room
temperature.
- Wait at least 20 seconds after the equipment has been
CAUTION
turned off to turn it back on.
- Allow the equipment to warm up for at least 5 minutes
before acquiring images or preferably more than 30
minutes for image quality.
Turn the ON / OFF switch underneath the handle frame to the ON position.
Check whether the LED lamp on top of the equipment is illuminated. If it is
illuminated, the equipment is ready for image acquisition.
Running the Image Viewer – EasyDent
EasyDent is a basic imaging platform for all VATECH's dental X-ray
equipments. Both the Imaging Program and 3D Viewer are interfaced with
EasyDent.
On your desktop, double-click EasyDent or click Start → All Programs →
EasyDent.
The EasyDent main window will be displayed.
ON
OFF
PaX-i (PCH-2500) User Manual