Optika Italy B-1000 Serie Mode D'emploi page 33

14. Microphotography
14.1 Use of C-mount cameras
1. Loosen the clamping screw
remove the dust cap
2. Screw the C-mount adapter
the round dovetail of the C-mount into the empty hole of the
trinocular port, then tighten the clamping screw
14.2 Use of reflex cameras
1. Insert the Reflex adapter
scope .
②
2. Screw the "T2" ring
3. Connect the Reflex camera
(Fig. 54).
4. Mount the other end of the relay tube
of the trinocular port, then tighten the clamping screw. (Fig.
52)
• "T2" ring is not provided along with the microscope, but is
commercially available.
• While shooting dark specimens, darken eyepieces and view-
finder with a dark cloth to minimize the diffused light.
• To calculate the magnification of the camera: objective magni-
fication * camera magnification * lens magnification.
• If using an SLR camera, mirror movement may cause the
camera to vibrate.
• We suggest lifting the mirror, using long exposure times
and a remote cord.
on the trinocular port and
①
. (Fig. 52)
②
③
to the camera
into the relay tube to the micro-
①
③
(not provided) to the reflex adapter.
to the "T2" ring just installed
④
into the empty hole
②
and insert
④
. (Fig. 53)
①
Page 33
④
③
①
② ②
① ①
F ig. 52 F ig. 52
④
③
F ig. 53 F ig. 53
②
F ig. 54 F ig. 54