8.3
Motorised version
1. Assemble the stage in the same way as the manual version.
•
Check the perfect alignment of the rear part of the stage with
the rear arm of the frame.
•
A non perfect alignment could lead to an incorrect functioning
of the system. (Fig. 16)
2. Connect the cable ① from the stage to the frame and tight
the locking screws of the connectors ②. (Fig. 17)
3. Connect the provided cables: ③ 12V power supply for the
motorised parts; ④ 6V microscope power supply; ⑤ serial
cable; ⑥ PS/2 mouse. (Fig. 18)
•
Connect power cables as the last step.
Page 20
②
①
③ ④ ⑤ ⑥
F ig. 16
F
ig. 16
F ig. 17
F
ig. 17
F ig. 18
F
ig. 18