Table des Matières
Publicité
Communication Fieldbus / appareil de mesure
Paramètres du bus Standard Transducer Block (TB)
Parameter
Mettler-Specific Parameters – Calibration
37 CAL_OFFSET_ISFET
38 CAL_ZERO_ORP
39 CALIBRATION_TIMER
40 CALIBRATION_MODE
41 CALIBRATION_MODE_BUFFER
42 CAL_SAMPLE_PRD_PH
43 CAL_SAMPLE_PRD_PH_STORED
_VAL
44 CAL_PRODUCT_PH
45 CAL_SAMPLE_PRD_ORP
46 CAL_SAMPLE_PRD_ORP_
STORED_VAL
47 CAL_PRODUCT_ORP
100
Description
Sets the offset of the ISFET.
The zero offset resulting from a buffer cal-
ibration.
Sets the calibration timer
(time in which the device should be
calibrated).
Sets the calibration mode.
Sets the buffer set for
CALIBRATION_MODE.= BUF
Starts the 1st part of pH-product calibra-
tion.
Shows the stored value of the first step of
pH-product calibration
Sets the value for the 2nd part of
pH-product calibration.
Starts the 1st part of ORP-product
calibration.
Shows the stored value of the first step of
ORP-product calibration
Sets the value for the 2nd part of ORP-
product calibration.
Transmetteur pH 2100e FF
Publicité
Table des Matières
