Override Switch
The engine is normally speed limited when operating in 4WD
LOCK. If conditions require more engine power:
Release the throttle and press the override button, the override
indicator light will be 'on'.
Continue to press the button, then reapply the throttle. The engine
will have full power.
Release the button to restore the speed limiting function.
When the button is on this position, speed limitation is canceled.
●
When the button is on this position, the vehicle is normally
speed limited.
Note: Override button can not be used in the state of
2WD/4WD�
Do not press override button when the vehicle is in speed limiting
mode and the throttle is open. Pressing the override button while
the throttle is open may cause sudden acceleration, resulting in a
loss of control, severe injury, or death. Always release the throttle
before pressing the override button.
Controls and Features
WARNING
65