Publicité
Les langues disponibles
Les langues disponibles
Change Transmission Oil
1. Place the vehicle on the level ground and park the vehicle.
2. Start the engine and warm for ( 2 ~3 ) minutes, then stop the
engine.
3. Place a pan under the transmission drain hole ( 1 ) to store the
oil.
4. Remove the dipstick and wipe it clean.
5. Remove the transmission magnetic drain bolt ( 2 ) and washer
( 3 ) to drain out the oil.
6. Wait until the transmission is drained completely.
7. Clean any debris or contaminants from the magnetic drain bolt
( 3 ) . Replace the washer ( 2 ) with new one if damaged.
8. Mount the magnetic drain bolt ( 2 ) and washer ( 3 ) .
Drain Bolt Torque: 14�7 ft-lb� (20 N·m)
9. Use a dry and clean cloth to wipe the area around magnetic
drain bolt.
Add the recommended type of oil ( SAE 75W-90 GL-5 ) into oil
dipstick hole using the funnel, funnel extension tube and tube
adapter that are supplied with the vehicle. Keep oil level in the
specified range.
Maintenance
138
1
2
3
Publicité
