Secondary Controls
Switch Panel - ( 2 0 )
Main Light Switch
The main light switch consists of 3 positions. Turn the switch to
select the following functions:
When the switch is on this position, head light, position
light, tail light and instrument light are 'on'.
When the switch is on this position, position light / tail light
will be 'on' and head light will be 'off'.
●
When the switch is on this position, all the lights are turned
off.
Note:
Ignition key must be turned to 'ON' position before operating head
lights. More vehicle lights are used, the dashboard displays with
higher brightness.
Do not use the headlights with the engine turned off for more than
15 minutes. The battery may discharge to a point that the starter
motor will not operate properly. If this should happen, remove the
battery and recharge it.
Controls and Features
CAUTION
63