Festo DADE-MVC Serie Mode D'emploi page 26

Criteria
Inputs and outputs to the PLC:
– Polarity
– Characteristic
– Switch-on delay of the
inputs (debounce time)
Analogue output to PLC:
– Type DADE-MVC-010:
– Voltage range
– Load impedance
– Type DADE-MVC-420:
– Current range
– Load impedance (load)
Protection against incorrect
polarity (PLC connection)
Electrical isolation:
Inputs/outputs/measured signal
Repetition accuracy depends on
the work stroke
Linearity fault
Signal run time
26
DADE-MVC
PIN 3, 5, 6, 7 on the S1
PNP
EN 61131-2 (type 2)
Typical: 3 ms
PIN 2 and 4 on the S1
0.1 ... 9.9 V
R ≥ 1 kΩ
4.1 ... 19.9 mA
R ≤ 600 Ω
Yes
No
≤ 400 mm: ±0.1 mm
≤ 500 mm: ±0.13 mm
≤ 750 mm: ±0.19 mm
≤ 1200 mm: ±0.3 mm
±0.2 %, related to the calibrated
stroke
Max. 10 ms (from reaching the
position to outputting the
analogue value)
Festo DADE-MVC 1503b English