Accessories - Siemens Scio Manuel De Référence

Message Condition
MultiGas H/W Loss of communication or hardware
failure problem detected
MultiGas Scio H/W or S/W incompatibility
Incompatible
MultiGas Device initializing
Initialization
MultiGas Oxygen Oxygen calibration successful
Cal. Accepted
MultiGas Oxygen Oxygen calibration in progress
Cal. in Progress
MultiGas Sample Scio module sample line occluded
Line Occlusion Watertrap full, defective, or not
installed.
MultiGas Scio module has become discon-
Unplugged nected
MultiGas Zero in Scio module zero in progress
Progress

Accessories

Scio Water Trap (12 pieces)
Scio Sample line (Set of 10)
Power supply
SC 7/8/9XL VF2.x
Suggested Action
• Check connections.
• Unplug and re-plug Scio module.
• Power-cycle monitor or un-dock
and re-dock monitor.
• Call Manufacturer.
• Check version numbers.
• Call Manufacturer.
• Wait
• None
• Wait
• Check sample line and replace if
necessary.
• Check watertrap, replace or install,
if necessary.
• Check the connection and recon-
nect if necessary.
• If message persists, call Manufac-
turer.
• Wait
Scio MODULE D011100
Scio Module
78 68 123 E530U
78 68 115 E530U
59 53 539 E530U
Page 21