Siemens Scio Manuel De Référence page 13

etCO2* (end-tidal CO
Respiration rate
label and value
NOTE: The monitor does not alarm for etCO
expiratory agent limit violations until it has established a valid res-
piratory rate.
To access the Scio etCO
!
Click on the etCO
or
1. Press the
2. Click on
3. Click on
4. Click on
Quick Reference Table -- etCO2* Setup
Click on the following items to execute etCO
Menu Item Description
Scale Sets etCO
Agent Display Displays a separate Agent parameter box;.
Ghosted if the monitor is displaying combined
MultiGas parameter box (page 15)
Pressure Comp. Sets compensation for ambient atmospheric
pressure
RRc* Apnea Sets time that the monitor waits before report-
Time ing a cessation of breathing as an apnea event
Apnea Archive Allows you to store and/or record automatically
an alarm event for apnea. You can later review
stored alarms on the Event Recall screen.
SC 7/8/9XL VF2.x
) label and value
2
Alarm limits
* setup menu:
2
* parameter box
2
Menu fixed key.
Patient Setup .
to display a list of available parameters.
Parameters
.
etCO2*
The etCO * Setup Menu
2
waveform scale
2
Scio MODULE D011100
Scio Module
Alarm limits
iCO (inspired CO )
2 2
label and value
Alarm limit
(Upper limit only)
or inspiratory and
2
* setup functions:
2
Settings
• 40, 60, 80
• ON, OFF
• Auto
• OFF, 10, 15, 20, 25, 30 s
• OFF, Record, Store
(default), Str./Rec.
Page 9