Siemens Scio Manuel De Référence page 15

Parameter Box
Notes: The  symbol in the parameter box indicates that the O
been set to a value less than 21% (the percentage of O
The O parameter box does not show N
2
To access the O
!
Click on the O
or
1. Press the
2. Click on
3. Click on
4. Click on
Quick Reference Table -- O2/N2O Setup
Click on the following items to execute O
Menu Item Description
MultiGas Parameter Enables combined MultiGas parame-
ter box display (see SC 7000/8000/
9000XL User's Guide Chapter 23)
O2 Scale Sets O
N2O Display Displays N
Notes: This selection is ghosted and
not available if the monitor is config-
ured to display a combined Scio
parameter box (see page -15).
There is no alarm function for N
and the parameter box does not
show N
Auto Zero Delay Delays automatic zeroing for 5 min-
utes for uninterrupted monitoring
(see page 9 for information)
1 Point Cal.
2 Point Cal.
Last O2 Cal.
O2 Alarms Accesses Limits table (see
8000/9000XL
SC 7/8/9XL VF2.x
Description
O alarm limits because N
2
(/N O) setup menu:
2 2
/N O parameter box
2 2
Menu fixed key.
Patient Setup .
to display a list of available parameters.
Parameters
.
O2
The O (/N O) Setup Menu
2 2
waveform scale
2
O values
2
O
2
O alarm limits.
2
See page 6 for detailed information on calibration functions
SC 7000/
User's Guide Chapter 5)
Scio MODULE D011100
Scio Module
lower alarm limit has
2
in room air).
2
O does not alarm.
2
/N O setup functions
2 2
Settings
• ON, OFF
• 50 %, 100 %
• ON, OFF
N/A
N/A
Page 11