Combined Display (O2/Agent/N2O) - Siemens Scio Manuel De Référence

Combined Display (O2/Agent/N2O)

The O /N
2
single waveform channel and MultiGas parameter box. Typical
combined MultiGas parameter boxes are shown below.
Parameter Box
To enable the combined M
1. Open the Main Screen setup menu (see SC 7000/8000/
9000XL User's Guide page 2-4).
2. Click on
3. Select
NOTES:
!
You can also enable MultiGas Parameter from the O
(see page 11) or the O
!
The combined
the O
O
the parameter priority list (see SC 7000/8000/9000XL User's
Guide Chapter 2).
!
When you select the combined
N
To access the combined (O
1. Ensure that
2. Return to the Main Screen.
3. Click on the O
SC 7/8/9XL VF2.x
O and Agent parameters can be combined to share a
2
G
ULTI
to go to the Main Screen menu's second page.
More
MultiGas Parameter
/N
2 2
M G
ULTI AS
parameter box on the Main Screen. Make sure that the
2
M G
or the parameter is appropriately assigned on
ULTI AS
2
O values are automatically enabled for display.
2
/Agent/N
2
MultiGas Parameter
/Agent/N O combined parameter box.
2 2
Scio MODULE D011100
Scio Module
Description
The Scio module has identified an agent
and displays concentration levels for O
isoflurane, and N O.
2
The Scio module is in automatic agent
identification mode (ID Override OFF),
but has not yet identified the agent.
parameter box display:
AS
; click the knob to select
O menu (page 11).
parameter box takes the place of
M G
parameter box,
ULTI AS
O) setup menu:
2
is .
ON
,
2
.
ON
menu
2
Page 15