NERONE MID Serie Notice D'utilisation page 55

Cooking end and modification of parameters in
functioning or pre-heating phase
During the pre-heat or cooking phase, by pressing the (3-2) UP
keys, the pre-set values can be changed; by pressing the (4) "ON/OFF - SET H
DOWN
the H O injection can be modified.
2
The oven goes back to "Pre-heating or cooking" mode after 5 seconds from the last time a key was pressed. In
this case, the oven applies the new parameters set.
At the end of cooking, the oven emits a sound and the wording "END" appears, at this point it is possible to:
1) start the cycle again by holding the (5) "COOKING CYCLE START/PAUSE"
2) go back to cooking settings by opening and then closing the door;
3) cool the oven with the door open by pressing the (6) "COOLING - COOKING WITH CORE PROBE -
H O INJECTION"
2
Recipes
Setting a recipe and modification
Up to 10 different combinations of cooking parameters are memorised in the recipe menu:
∆T°
A - Core probe set-point and differential
B - Hours/Minutes Timer
C - Water Dosage
D - Chamber and Core Probe Temperature
By activating the (7) "RECIPES - LIGHTS SWITCH-ON IN COOKING CHAMBER"
passes to recipes selection/setting mode and the display shows the "money-box"
the selection made. The recipes can be scrolled using the (3-2) UP
and they are indicated by the letter "R" and "N" recipe number (from 1 to 10). Once a recipe has been selected,
on waiting in cyclical mode, its parameters will be displayed. If a recipe results not yet set, the oven shows the
parameters at "0".
Once the recipe of interest has been displayed, by pressing the (4) " SET H
parameters that can be modified are entered in the same way as the manual settings (Manual parameters set-
ting" paragraph); by holding the (5) "COOKING CYCLE START/PAUSE"
memorised also by overwriting existing parameters.
Cooking cycle with recipe
On entering the recipes function with the (7) "RECIPES - LIGHTS SWITCH-ON IN COOKING CHAMBER"
key and finding the one of interest with (8-9) UP
CYCLE START/PAUSE"
NERONE
key, which will end on reaching 80° and then go back to the main screen.
key, the cooking cycle set start-up automatically.
| User and Maintenance Manual | EN
DOWN keys and the (8-9) UP
DOWN
O- ON/OFF" key
2
key down, the settings can be
DOWN keys, by pressing the (5) "COOKING
O" key
2
key down;
key, the interface
icon to show the user
keys in a cyclical manner
, the
55