IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
GLASS COOKTOP SAFETY INSTRUCTIONS
surface of the cooktop will retain heat after the
controls have been turned off.
should break, cleaning solutions and spillovers
may penetrate the broken cooktop and create a
risk of electric shock. Contact a qualified technician
immediately.
can be scratched with items such as knives, sharp
instruments, rings or other jewelry, and rivets on
clothing.
and CERAMA BRYTE
the cooktop. Wait until the cooktop cools and the
indicator light goes out before cleaning. A wet
WARNING
OVEN SAFETY INSTRUCTIONS
door. Hot air or steam which escapes can cause
a glowing spot during use or shows other signs
of damage. A glowing spot indicates the heating
element may fail and present a potential burn, fire,
or shock hazard. Turn the oven off immediately and
have the heating element replaced by a qualified
service technician.
the oven may ignite.
cool. If rack must be moved while oven is hot, do not
let pot holder contact hot heating element in oven.
READ AND SAVE THESE INSTRUCTIONS
29-6265
Rev. 0
ceramic Cooktop Cleaner
®
Cleaning Pad to clean
®
sponge or cloth on a hot surface can cause steam
burns. Some cleaners can produce noxious fumes if
applied to a hot surface. NOTE: Sugar spills are an
exception. They should be scraped off while still hot
using an oven mitt and a scraper. See the Cleaning
the glass cooktop section for detailed instructions.
cleaning cream label.
fire on the glass cooktop, even when it is not being
used. If the cooktop is inadvertently turned on, they
may ignite. Heat from the cooktop or oven vent after
it is turned off may cause them to ignite also.
spoons and lids on the cooktop surface since they
can get hot.
follow the manufacturer's directions.
loading and unloading food from the oven. This
helps prevent burns from touching hot surfaces of
the door and oven walls.
or food in the oven when not in use. Items stored in
an oven can ignite.
or any type of foil or liner on the oven floor. These
items can trap heat or melt, resulting in damage to
the product and risk of shock, smoke or fire.
5