JB Systems Light CMX-24 Mode D'emploi page 8

ENGLISH
How to recognize the mode:
o

Safe mode : red lamp above the <RECORD/SHIFT> button isn't lit.

Program mode : red lamp above the <RECORD/SHIFT> button is lit.

Edit mode: yellow lamp above Preset B fader is lit, despite of the position of the
fader.

Working memory
During the programming (program mode) you will use the working memory. You will store the setting of light
effects/lamps in this memory and afterwards to you will assign this setting to a Preset B fader. The working
memory will maintain his content until you assign or erase (<RECORD/KILL> + <REC CLEAR>) the
settings.
This memory isn't used in Edit mode, there you change the setting of light effects/lamps that are already
stored in a Preset B fader.
In the next paragraphs, the methods to program and change chases/scenes are explained.

Activate program mode
Activate Program mode
o Press and hold the <RECORD/SHIFT> button.
Press and release the <PRESET A 1> button
o
Press and release the <PRESET A 5> button
o
Press and release the <PRESET A 6> button
o
Press and release the <PRESET A 8> button
o
o Release the <RECORD/SHIFT> button
The red lamp above the RECORD/SHIFT button is lit.
!! This mode will stay activated, even if the CMX24 is turned off, until you leave the mode. It's advised
to leave this mode as soon as the scenes are programmed/changed. Doing this, you can avoid that
other people, who are not used to work with the controller, will change your program.

Leave program mode, go to secured mode
To leave the program mode:

Press and hold the <RECORD/SHIFT> button

Press and release the <KILL/REC EXIT> button.

Release the <RECORD/SHIFT> button
The red lamp above the RECORD/SHIFT button goes out.
If the lamp doesn't go out, it means that you are in Edit mode, repeat the complete procedure.

Delete all
You can delete the complete memory by doing this:
JB SYSTEMS 11/93
®
OPERATION MANUAL
CMX24
ENGLISH
Activate the program mode

Press and hold the <RECORD/SHIFT> button

Press and release the <PRESET A 1> button

Press and release the <PRESET A 5> button

Press and release the <PRESET A 6> button

Press and release the <PRESET A 8> button

Release the <RECORD/SHIFT> button
The lamp above the RECORD/SHIFT button is lit.
!! The next procedure will delete the complete memory. Remember there is no way back!!
Delete the complete memory:

Press and hold the <RECORD/SHIFT> button

Press and release the <PRESET A 1> button

Press and release the <PRESET A 3> button

Press and release the <PRESET A 2> button

Press and release the <PRESET A 3> button

Release the <RECORD/SHIFT> button

Record a Scene
(ONLY possible in program mode.)
Be sure that the work memory is empty:

Press and hold the <RECORD/SHIFT> button

Press and release the <PAGINA/REC CLEAR> button

Release the <RECORD/SHIFT> button
Make your settings:

If you want to set only 12 channels, u can use the Preset A faders.

If you want to set 24 channels, you first have to select the Single Preset mode by using the
<MODUS SELECT/REC SPEED> button. Set your channels by using the Preset A and Preset B
faders.
Example:

Channel 1 = 100%

Channel 2 = 27%

Channel 3 = 60%

Channel 4 to channel 8 = 0%

Channel 9 = 72%

Channel 10 = 30%

Channel 11 = 0%

Channel 12 = 95%
Record this preset in the work memory:

Press and release the <RECORD/SHIFT> button

The display shows [001]
001 on the display indicates that you have recorded 1 scene in the working memory.
Store the content of the working memory in the Preset B 1 fader of page 1:

Select page 1 by pressing several times the <PAGINA/REC CLEAR> button till the lamp "1" is
lit.

Press and hold the <RECORD/SHIFT> button

Press and release the <PRESET B 1> button

Release the <RECORD/SHIFT> button
You have now stored a scene in the PRESET B 1 fader of page 1. The working memory has been deleted.
JB SYSTEMS 12/93
®
OPERATION MANUAL
CMX24