JB Systems Light CMX-24 Mode D'emploi page 7

ENGLISH

HOLD
The {FADE} fader has to be placed in the highest position.
The {MASTER A} fader has to be placed in the highest position.
All the preset faders (A and B) have to be placed in the lowest position.

Place {PRESET A 1} at 75%.

Place {PRESET A 2} at 50%.
Press and hold the <HOLD> button above the FADE fader. The led above this button is lit.

Place {PRESET A 1} at 0%.

Place {PRESET A 2} at 100%.

Place {PRESET A 3} at 75%.

Place {PRESET A 4} at 100%.
The light effects keep the actual intensity.
Release the <HOLD> button.
The light effects will adapt directly to the new intensities.
Using the HOLD button you can maintain the current scene while setting the next scene.
Move the {FADE} fader until the display shows [10.0] (a fade time of 10 seconds)
Press and hold the <HOLD> button.

Place {PRESET A 1} at 100%.

Place {PRESET A 2} at 10%.

Place {PRESET A 3} at 75%.

Place {PRESET A 4} at 0%.
Release the <HOLD> button.
The scène will change slowly (within 10 seconds) from the previous to the next. You'll get a perfect fade. The
HOLD button always works despite of the current mode.

DOUBLE PRESET MODE:
In this mode you can use the control as an 12 channel A-B control. Change the mode to double preset:

Press and release <MODUS SELECT/REC SPEED> until the [DOUBLE PRESET] lamp will be
lit above the master A and master B faders.
Set the following faders:

Place {PRESET A 1} fader at 100%

Place {PRESET A 2} fader at 50%

Place {PRESET A 3} fader at 25%

Place {PRESET A 4 - 12} faders at 0%

Place {PRESET B 1} fader at 0%

Place {PRESET B 2} fader at 50%

Place {PRESET B 3} fader at 75%

Place {PRESET B 4} fader at 100%

Place {PRESET B 5} fader at 50%

Place {PRESET B 6 - 12} faders at 0%

Place {MASTER A} fader at 0% (lowest position!!!)

Place {MASTER B} fader at 0% (highest position!!!)
No lamps will be lit.
Move the {MASTER A} fader slowly to 100% (highest position). Channels 1 to 3 will be lit immediately to
100%, 50% and 25%
Move {MASTER A} fader and {MASTER B} fader simultaneously to the lowest position. Master A will
change to 0% and Master B will change to 100%. Channels 1 to 5 will be lit at 0%, 50%, 75%, 100% and
50%. You have made a fade from the first to the second scene.
You can change this scene by moving the PRESET B faders. Moving the PRESET A faders doesn't change
anything.
Now, you can set the PRESET A faders to a new scene.
JB SYSTEMS
®
OPERATION MANUAL
9/93
ENGLISH
Move {MASTER A} fader and {MASTER B} fader simultaneously to the highest position. Master A changes
to 100% and Master B changes to 0%. You will a slow fade from the first scene to the second scene. You
are working in the A-B preset mode.
IMPORTANT: Move the {MASTER A} fader to 100% (highest position) and the {MASTER B} fader to 100%
(lowest position). The CMX24 will choose for the highest values.



This only works when BOTH masters are set at 100%. The highest intensity has priority

PARK
Set {MASTER A} fader and {MASTER B} fader at 50%, middle position. The scène is a combination of both
presets.
Press and hold the <PARK> button above the Master B fader. Master B will be set at 100% ( this is visible
on the green leds). When a fade time is set, this will happen slowly.
Press and hold the <1-24> button above the Master A fader. Master A will be set at 100% ( this is visible on
the green leds). When a fade time is set, this will happen slowly.

CHASE/SCENES mode
This control mode allows you to store a scène or a chase of 24 channels in every Preset B fader. The
CMX24 has 4 pages, so you can store altogether 48 scenes/chases.
You can activate this mode like this:

Concepts:

Scene/Chase:
A scène is 1 setting of the intensity of the 24 channels. This is in fact a chase with 1 scene. Only this setting
will be showed constantly.
A chase contains multiple scenes and each scene contains the intensity for 24 channels. The scenes will be
showed one by one (and you can set the speed/fade time).
You have 4 pages with each 12 PRESET B faders which each can contain a scene or a chase. So you can
store 48 chases/scenes.

Record mode:
The CMX24 can work in 3 modes:
Safe mode and program mode are always available, whether you are working in Single Preset, Double
Preset or Chase/Scenes mode. The Edit mode is only available in the Chase/Scenes mode. Next drawing
shows you how you can change from one modus to another.
CMX24 JB SYSTEMS
Channel 1 at 100%
Channel 2 at 50% (A:50% is higher then B:25%)
Channel 3 at 75% (B:75% is higher then A:25%)
Press and release the <MODUS SELECT/REC SPEED> button until the [CHASE SCENES]
lamp is lit above the master A/B faders.
Safe mode, in this mode you can't change the programs
o
o Program mode, in this mode you can save/erase programs
Edit mode, in this mode you can change programs
o
10/93
®
OPERATION MANUAL
CMX24