Keypad Operation; Check Battery Status; Normal Mode; Activity Mode - PROTEOR Freedom QUATTRO Instructions D'utilisation

Masquer les pouces Voir aussi pour Freedom QUATTRO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14

11.6. Keypad Operation

11.6.1. Check Battery Status

Press and release button to show the
current battery power status.

Normal mode

Indicator Light
Solid Green
Power
Flashing Green
Solid Red
Flashing Red
When QUATTRO is plugged into a charger
Current battery charge is indicated by a
flashing green light. The more the battery
is charged, the longer time each flash will
stay lit.
Rebooting The Knee
Hold button for six seconds until the green
and blue lights flash. Only use this feature
as directed by your prosthetist if you are
having problems with your device.

11.6.2. Activity Mode

Press and release button to show current
activity mode. Slow flashing white light
means you are in Walking Mode. Fast flashing
means you are using your currently selected
Alternate Activity Mode.
Change Activity Mode
Mode
Hold button for three seconds to switch
back and forth between Walking Mode and
your currently selected Alternate Activity
Mode. When changed, lights will indicate
new mode (see above). White and red flashing
means there is no Alternate to select, or
it is unsafe to change modes right now.
Set or Release Flexion Lock
Double press button to set or release the
flexion lock. When locked, the white light
will be solid.
12
Charge Level
51% - 100%
21% - 50%
11% - 20%
1% - 10%
PROTEOR |

11.6.3. Pair Knee with Mobile App

Wireless
To pair your QUATTRO to the app the first
time you connect, quickly press and release
the button when prompted by app

11.6.4. Putting the Knee into Storage Mode

Hold both the Mode button and the Wireless
Mode
button at the same time for six seconds
until all the lights flash, and then turn off.
When in storage mode the QUATTRO will be
completely powered off and unresponsive.
+
Pressing the power button will not turn the
device back on. To turn the knee back on,
Wireless
you must plug in the charger. The knee is
shipped in Storage Mode from the factory
(must be plugged into power source to turn
on).
NOTE: The device will not enter storage mode
if connected to the charger.

11.7. Keypad Button Reference

Feature
Action
Check battery status
Press Battery Button
Flexion lock enable
Double Press Mode Button
Flexion lock disable
Double Press Mode Button
Check activity
Press Mode Button
Toggle activity
Hold Mode Button
Pair Press
Wireless Button
Storage mode
Hold Mode + Wireless Buttons
Reset
Hold Battery Button
FREEDOM QUATTRO
| Instructions for Use
Hold Time
3 sec
6 sec
6 sec
13

Publicité

Table des Matières
loading

Table des Matières