Warranty And Service; Technical Support; Electromagnetic Compatibility Precautions; Guidance And Manufacturer's Declaration - Electromagnetic Emissions - PROTEOR Freedom QUATTRO Instructions D'utilisation

16 | Warranty and Service
Purchase of the QUATTRO includes a 36-month warranty
covering all manufacturer defects effective only if the product
is used according to manufacturer recommendations.
The battery charger, and accessories are provided with
a 12-month warranty. An exteded warranty and service
recommendation is available. See company website for
details.
For knee service or repair, please contact PROTEOR at
1.855.450.7300. A loaner knee will be provdied upon
request. For loaner and shipping information please see
technical support section.

17 | Technical Support

• For User Support, please contact your Certified Prosthetist
• For Prosthetist Technical Support, supplementary training
material or to schedule service, please contact Proteor
toll-free at 1.855.450.7300
• A loaner knee can be provided upon request. Knees requiring
service from the US should be shipped in the provided case to
the following address:
PROTEOR USA
3 Morgan
Irvine, CA 92618
• In Europe, please ship to the following address:
PROTEOR
Rue du Cheffin
21250 Seurre, France
20
PROTEOR | FREEDOM QUATTRO
18 | Electromagnetic Compatibility Precautions
• The QUATTRO needs special precautions regarding
electromagnetic compatibility (EMC). Specifically, it needs
to be installed and put into service according to the EMC
information provided as follows:
• The QUATTRO may be susceptible to electromagnetic
interference from portable and mobile RF communications
devices such as mobile (cellular) telephones.
• The QUATTRO may be interfered with by other equipment,
even if that other equipment complies with CISPR EMISSION
requirements.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
19 | Guidance and Manufacturer's Declaration –
Electromagnetic Emissions
QUATTRO is intended for use in the electromagnetic
environment specified below. The customer or user
of QUATTRO should assure that it is used in such an
environment.
Emissions Compliance
Test
RF Emissions
EN 55011/ Group 1
CISPR
RF Emissions
EN 55011/ Class B
CISPR
| Instructions for Use
Electromagnetic Environment—
Guidance
QUATTRO uses RF energy only for its
internal function. Therefore, its RF
emissions are low and are not likely
to cause any interference in nearby
electronic equipment.
QUATTRO is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic
purposes.
21