Thank you for purchasing this moving head. Please read user guide for safety and operations information before using
the product. Keep this manual for future reference. Please check the attachments listed on the page after opening the
carton. In the event of carton damage or attachment missing in transit, please contact your dealer or our after sales
service department.
Technical specifications
Voltage: ....................................................................... AC100-240V, 50-60Hz
Led : ............................................................ 7x 15W RGBW 4 in 1 ( OSRAM )
Pan:
.................................................................................................. 540°/630°
Max pan speed time:
................................................................................. 1,2s
Tilt:
............................................................................................................ 270°
Max tilt speed time:
................................................................................... 0,4s
Led beam angle:
....................................................................................... 6,8°
Led lifetime:
................................................................................ 100000 hours
Control mode: ...................................... Sound control/auto/DMX/Master-slave
DMX channel: ..................................................................................... 12/16/18
Wattage:.... ..............................................................................150W
Dimensions:.... ........................................................... 245x135x335mm
Weight:.. ................................................................................................. 4,8Kg
For indoor use only
Warning
Do not expose the human eye direct to led beam.
Do not turn on and off the unit frequently.
Before using this unit make sure the power supply is grounded.
This unit is intended for indoor use only and should be kept away from water, moisture and shakes. The working
temperature of this unit is 18-30°C, do not run it continuously.
Use a cleaning tissue to remove periodically the dust on the external lenses to optimize light output.
Always replace with the exact same type fuse, replacement with anything other than the specified fuse can cause
fire or electric shock and damage your unit, and will void your manufactures warranty.
Unplug the unit from the mains prior to cleaning or repairing it.
All repairs must be carried out by a qualified technician. Do not try to repair the unit yourself. It doesn't contain any
user serviceable parts.
Do not use the unit if the mains lead is damaged. A damaged mains lead must be immediately replaced by a
qualified electrician. Do not try to replace the mains lead yourself.
RIGGING
This fixture may be mounted in any position, provided there is adequate room for ventilation
It is important never to obstruct the fan or vents pathway.
When selecting installation location, take into consideration lamp replacement access and routine maintenance.
Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or
restricted ventilation.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or his service agent or a similar qualified person in order to avoid a hazard.
INSTALLATION INSTRUCTIONS
Power Supply and Signal Cable Connection
1. Mains Power connection
The exclusive plug should be used between the connection of unit and power. Please ensure that the rated voltage
and frequency are accordance with the power supply. The required input voltage and frequency are: 1000-240V / 110-
120V 50-60Hz
We suggest that every light has an independent switch so that you can turn on or turn off the light randomly.
Note: the ground wire (yellow/green double-color wire) must be safely connected, the electronic installation must be in
accordance with the related standards
CAUTION: When installing the device, make sure there is no highly inflammable material within a distance of min.5m!
©Copyright Lotronic 2014
GB
LEDWASH 715