ECONOMY CONTROL SWITCH/VOLTAGE SELECT SWITCH
a
ECON.SW
1
ON
b
1
b
OFF
e
c
d
2
3
a
ECONOMY CONTROL SWITCH
1. Check:
9 Economy control switch 1
Checking steps:
9 Start the engine with the economy con-
trol switch 1 in the "OFF" b position.
9Connect the electric device to the AC
outlet and turn it on.
9Check that the engine speed stays
same.
9Turn the economy control switch 1
"ON" a
speed increases after initial decrease.
VOLTAGE SELECT SWITCH (For Canada)
1. Check:
9 Voltage select switch
Checking steps:
9 Set the voltage select switch to the
120 V.
cC
The engine must be turned off before
switching the voltage select switch.
9 Start the engine.
9 Connect the pocket tester (AC 300 V) to
the AC receptacles 1 or 2 and mea-
sure the each voltages .
Pocket tester:
YU-03112, 90890-03112
Digital circuit tester:
YU-A1927, 90890-03174
Voltage measures (a-b)120 V → OK
9 Connect the pocket tester (AC 300 V) to
the AC receptacle 3 and measure the
voltage.
Voltage measures 0 V → OK
9 Stop the engine.
9 Set the voltage select switch to the
120/240 V.
9 Start the engine.
Voltage measures (c-d) 120 V → OK
Voltage measures (c-e) 240 V → OK
5
INSP
ADJ
and check that the engine
(d-e) 120 V → OK