Saving Your Sounds; Save A Sound That You Like; Restoring All Settings - Korg StageVintage SV-1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

34 – Saving your sounds | Save a sound that you like

Saving your sounds

S
AVE A SOUND THAT YOU LIKE
If you like the sound you just created by exploring through the knob positions,
save it as a favorite sound.
Keep one of the FAVORITE buttons pressed, until its LED starts blinking.
1.
Press the same button again, to confirm saving.
2.
HINT: If you do not want to save the changes, just wait a few seconds until the
button's LED turns off, without pressing any button.
NOTE: The favorite sound is written over the previous contents of that location.
The favorite sound that previously occupied the number you selected in step 1
will be erased.
NOTE: If you switch to a different sound or turn off the power without storing
the sound and effects you edited, your changes will be lost.
R
ESTORING ALL SETTINGS
After doing several changes, you might want to restore the original, factory status
of the SV-1 (including original sounds, favorites and global settings):
Turn the instrument off.
1.
Keep the FUNCTION button pressed.
2.
Without releasing the FUNCTION button, turn the instrument on.
3.
When its LED starts flashing, release the FUNCTION button.
4.
Press the FUNCTION button again to confirm the restore operation.
5.
6.
At the end, all settings will be reset.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Stagevintage sv-1 73Stagevintage sv-1 88

Table des Matières