Korg StageVintage SV-1 Mode D'emploi page 27

Table des Matières

Les langues disponibles

MODULATION FX section

Here you can select a modulation effect. This selects one of six modulation effect

models. After selecting an effect with the TYPE knob, you can use the SPEED

and INTENSITY knobs to adjust the effect parameters. To reset a parameter to

the default value, press the corresponding knob. Effects are placed after the amp

and cabinet model.

The SLOW/FAST button switches the speed of the rotary effect.

NOTE: The parameters will be initialized when you select a different preset.

REVERB/DELAY section

Here you can select a reverb, delay or echo effect. This selects one of four reverb,

one echo, or one delay effect models. After selecting an effect with the TYPE

knob, you can use the DEPTH knob to adjust the effect's intensity. To reset it to

the default value, press the DEPTH knob. Effects are placed after the amp and

cabinet model, and after the modulation effect.

In case the stereo delay effect is selected, you can 'tap' its time on the TAP button.

NOTE: The parameters will be initialized when you select a different preset.

POWER switch

Use this switch to turn the power on/off.

Controls and connections | Front panel – 13

Table des Matières

Chapitres

Table des Matières

Stagevintage sv-1 73 Stagevintage sv-1 88