GERATHERM smart GT-1775 Mode D'emploi page 53

Preparation for use
Setting the time and date
It is important to set the clock before using your blood pres-
sure monitor, so that a time stamp can be assigned to each
reading that is stored in the memory. (Setting range for the
years 2017 - 2057; Time format: 24 hours).
1. With the device switched off, hold down the "START/
STOP" button for 3 seconds in order to enter the mode
for setting the year.
2. Press the "M" button to change the [YEAR]. Each time
you press, the number will increase by one.
53
EN