Publicité
Les langues disponibles
Les langues disponibles
4. Once the dirt has been removed, wash all the surfaces with warm water and soft detergent. To get to
the difficult areas, use a bottle-washing brush or something similar.
5. Immediately rinse with cold water and dry all the surfaces.
6. Clean the seat with a combination vinyl upholstery cleaner to keep it lustre and flexible.
7. To finish off, start the motor and let it run slowly for a few minutes. This way we can dry the bike out
completely
STORAGE.
Storage of the mortorbike for a long period of time demands certain care to prevent deterioration. Once
it is clean and lubricated, prepare to store the mortorbike in the following manner:
1. Drain the petrol tank, petrol pipes and the carburettor bowl.
2. Take the spark plug out and put a spoonful of SAE 10W30 oil through the plug hole and replace the
spark plug.
3. Cover the exhaust with a plastic bag to stop the humidity getting in.
4. Completely cover a bike with a sheet to keep of dust.
30
Publicité
