Rear Wheel Change; Rear Wheel Removal; Rear Wheel Insertion - Physipro Mediclean Manuel D'utilisation

Mediclean Wheelchair
ENGLISH
6.3 Wheel Locks Adjustments
It is possible to adjust the wheel locks if they are inefficient or too hard to engage.
Start by measuring the distance between the wheel and the wheel locks rod A when
the brake is off. This distance is a reference for the adjustment.
Use two 10mm wrenches to unscrew the bolt B and nuts C assemblies. Place the
wheel locks closer to the wheel for a more effective stopping. Place the wheel locks
farther from the wheel for ease of engagement of wheel locks. Tighten bolt B and
nuts C assemblies at the desired position.
B
C
A
Figure 22, Wheel Locks Adjustments

6.4 Rear wheel change

C

6.4.1 Rear wheel removal

A
Loosen nut C with a ¾ inch wrench while holding
bolt A with a ¾ inch ratchet wrench.
B
Slide the wheel out of the axle B, take bolt A off
the wheel.
Figure 23, Rear Wheel Change

6.4.2 Rear wheel insertion

Place bolt A in the wheel axle. Slide the bolt in positioning axle B. Tighten nut C with
a ¾ inch while holding bolt A with a ¾ inch ratchet wrench.
18