Physipro Mediclean Manuel D'utilisation page 10

ENGLISH
4.3.3 Elevation adjustment (height)
Some postural needs require elevating the legrest. For example, if you need to have
the calfrest almost at the same level as the upholstery as shown in Figure 9.
To adjust height, pull up the block E as shown in
Figure 10. Insert the pin F in one of the 2 adjustment
holes available G. Holes are by in 1 inch increments.
Push down on block E until the footrest is pressing
on the pin.
Note : A permanent rod H is placed in the lowest
position (reference position). The pin is just hanging
from its wire on that position.
Figure 9, Raised legrests
10
Mediclean Wheelchair
G
F
Figure 10, height adjustment
E
H