Upholstery Cloth Replacement - Physipro Mediclean Manuel D'utilisation

User Manual
ENGLISH
6.2 Upholstery replacement
To remove the upholstery, remove the caps A with a regular screwdriver.
A
Figure 20, Upholstery replacement
Slightly fold the wheelchair so it can slide easier in the next steps.
Pull off aluminum rod B as in Figure 21. The upholstery can now be pulled from the
crossbrace grooves.
B
Figure 21, Upholstery replacement
Place the new upholstery, making sure the catheter loop is in front. Insert both
sides in the crossbrace grooves. Insert the aluminum rods in the cloth eyelets, in the
crossbrace tubes. Completely unfold the wheelchair to stretch the upholstery and set
the rods in position. Put caps A back on.
Revision 1
October 2014
17