Wireless Specifications - Muller licht Tint Mode D'emploi

Problem
I have to press the
standby button several
times.
Which group is my
tint product in at the
moment?
For more information, see www.mueller-licht.de/tint

WIRELESS SPECIFICATIONS

Frequency band of wireless RF mode: . . .2405-2480,0 MHz
Maximum transmission power: . . . . . . . . .< 20 mW
Radio range (free field): . . . . . . . . . . . . . . . .30 m
Remote Control: . . . . . . . . . . . . . . . . . . . . . .3 V (1x CR2450)
Environmental conditions:
Temperature (operation): . . . . . . . . . . . . . . .-20°C...40°C
Temperature (storage): . . . . . . . . . . . . . . . .-25°C...60°C
Relative humidity: . . . . . . . . . . . . . . . . . . . . .5–95%
72
Possible causes
• If the tint product has previ-
ously been switched off using
the light switch, the tint remote
control will have to resynchro-
nize.
• You have switched off parts of
the system using a light switch.
The tint remote control is
resynchronizing.
Simply switching the groups on
and off again will tell you which
group your tint product is in.
(no condensation)
ENGLISH