Muller licht Tint Mode D'emploi page 65

• You can use the tint remote control to control a maximum
of 4 groups, whereby the fourth group is a combination of
the other three groups.
• Think beforehand about which tint products you want to
group together and try to make the groups logical and
comprehensible. This means you will be able to use the
groups later using the group button quickly and without
having to waste time testing them.
Using the group button
• The first time the group button is pressed, the LEDs
above it will show which group you are in.
• Pressing it again will advance you one group.
• You are in the next group when the following LED above
the group button lights up:
○ LED 1 for the first group
○ LED 2 for the second group
○ LED 3 for the third group
○ LED 1, 2 and 3 for all groups
Adding a new tint product
Take note of the technical specifications when purchas-
ing new products. We recommend tint products from
Müller-Licht. When using products made by other manufac-
turers, it is not guaranteed that all features will be support-
ed or will work as intended.
1. Switch on the new tint product. The new tint product
will signal that it is in coupling mode by briefly increas-
ing and decreasing its brightness and changing color if
GROUP FUNCTIONS 65