cecotec CONGA 1590 Manuel D'instructions page 51

Left side free-fall
2 sensor error
Right side free-fall
3
sensor error
Front free-fall sen-
4
sor error
Left wheel off the
5
ground
Right wheel off the
6
ground
Left side anti-colli-
7
sion sensor error
Right side anti-co-
8
llision sensor error
Front anti-collision
9 sensor error
10 Left wheel error
11 Right wheel error
Left-side brush
12
error
Right-side brush
13
error
14 Fan motor error
Main brush error
15
Low battery
16
Wi-Fi connection
17 failure
Note:
If none of the solutions solve the problem, try the steps below:
Switch off and switch back on the robot.
Contact the official Technical Support Service ofCecotec.
7. TECHNICAL SPECIFICATIONS
Model: Conga 1590 Active
Product reference: 05419
100-240 V, 50/60 Hz
Place the robot on a The robot's display
flat stable surface lights up in blue and
flashes quickly
The robot's dis-play
lights up in blue and
flashes slowly
Clean or unblock the The robot's display
front bumper lights up steady red
and blue
Ckeck if the wheel or The robot's display
brush is entangled or flashes switching
blocked and clean it from blue to red
Charge the robot Battery indicator
light lights up red
Check the Wi-Fi Wi-Fi light indicator
connec-tion and try blinks quickly
connecting again
ENGLISH
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
1 long beep
4 short
beeps
0 beeps.
51