Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Make sure the power switch is turned on.
During standby mode, press the On/off button on the robot or on the remote control to start
the robot up.
During Sleep mode, press the On/off button once to switch the robot to standby mode and
then again to start cleaning.
Standby
During this status, the robot is switched on and waiting for user operation.
During operation, press to stop and switch the robot to Standby mode.
Sleep mode
During standby mode, press the On/off button on the robot or on the remote control to start
the robot up.
During standby mode, press the On/off button on the robot for 7 seconds to enter Sleep mode.
During standby mode, the robot will enter sleep mode after 10 minutes of no operation.
Water intensity
Short press the water intensity to adjust the water intensity during scrubbing mode. Select
between 3: High, 2: Medium o 1: Low. The display will show 1, 2 or 3 and the robot will emit the
number of beeps respectively.
Timer settings
Long press the Water intensity/Time settings button to enter the time-settings mode. Use
the direction buttons to select the desired hour and minutes, and then short press the Water
intensity/Time settings button to save the settings.
Power
Long press the Power button for 3 seconds to select the suction power level. Select between
3: High, 2: Medium o 1: Low. The display will show 1, 2 or 3 and the robot will emit the number
of beeps respectively.
Direction button
During Standby mode or Automatic cleaning:
Press the upwards button to move the robot forward.
Press the downwards button to move the robot backwards.
Press the left direction button for the robot to turn left.
Press the right button to move the robot right.
Time and schedule settings
The robot's scheduling must be carried out from the remote control by means of the schedule
button.
Scheduling
46
Publicité
