fig.12
fig.13
fig.14
fig.15
ASSEMBLY AND ADJUSTMENTS
TO CLOSE THE LEG STAND AND MOVE THE SAW (Fig. 12-15)
• Remove any workpieces from the tool.
• Remove and securely store any tools or accessories such as rip fence, mitre gauge
blade guard, push stick, etc.
• Lower the saw blade.
To close the leg stand:
• At the same time, step on the release lever, grasp the grips, and lift the handles
up and away from the body.
• Push the table saw until the release lever clicks and locks into place.
To move the leg stand:
• Holding the grips firmly, pull the handles towards you until the stand and saw are
balanced on the wheels.
• Push the table saw to the desired location then either open the stand for saw
operation or store the table saw in a dry enviroment.
47