Haussmann Xpert MJ10250IXA Guide De L'utilisateur page 47

ASSEMBLY AND ADJUSTMENTS
TO OPEN THE LEG STAND (Fig. 9-11)
• Grasp the grips on the stand and stand the table saw upright as shown Fig. 9.
• Step on the leaser lever and pull the grips toward you at the same time.
• Once the stand is released from the release lever, slide stand toward the floor
by pushing the grips toward the floor.(Fig. 10)
• With your hands on the grips, push the stand towards the ground until the table saw
is in an open position. (Fig. 11)
NOTE: The release lever will close over the center brace locking the stand in an
open position. (Fig. 11)
TO STORE THE TABLE SAW ACCESSORIES
The table saw has convenient storage areas (lie in the table saw cabinet) specifically
designed for the saw's accessories. These accessories must be securely stored
prior to closing the stand and moving the saw.
46
Release lever
fig.9
fig.10
Center brace
fig.11
Release lever