KONG Italy Q.R.K. Mode D'emploi page 18

SECTION
4.1 GENERAL
The Q.R.K. is made of materials that are
highly resistant to wear and to external
agents. Despite this, the conditions of use
make it necessary to perform maintenance
and, in particular cases, even repairs.
4.2 ORDINARY MAINTENANCE
Maintenance operations that can be
performed by the user are:
- Cleaning: all moving parts must be kept
clean, preferably using compressed air.
If the Q.R.K. has been used in a salty
environment, it is important to wash it by
immersing it in fresh water. The device
4.3 ROUTINE MAINTENANCE
Every 3 years, even if not used, the Q.R.K.
must be opened for the internal mechanism
to be cleaned and greased.
This operation, which involves replacing
4.4 REPAIRS
Any repairs may only be carried out by
KONG S.p.A.
18
MAINTENANCE
must be dried quickly, preferably using air,
including hot air.
- Lubrication: after cleaning we
recommend lubricating the hinges and
moving parts using a few drops of silicone
based oil.
the leaded cable to prevent unscrewing,
must only be done by KONG S.p.A. or
personnel that have been instructed and
are authorised by that company.
AND REPAIRS